:	Jun 16, 2004

.

Fold down the rear seat backrest.

.

Release the door aperture weatherstrip.

.

Release the safety belt lower anchor.   Remove and discard the Torx bolt.

.

Release the upper trim access cover.

.

Remove the C-pillar upper trim panel.   Remove and discard the Torx screw.   Release the 4 clips.   Release the safety belt from the seat.

.

:   Do not disassemble further if the component is removed for access only. Remove the 4 clips from the C-pillar upper trim panel.

.

Install the clips to the C-pillar upper trim panel.

.

Install the C-pillar upper trim panel.   Attach the safety belt.   Secure with the clips.   Install a new Torx screw and tighten to 3 Nm (2 lb.ft).

.

Install the upper trim access cover.

.

Install the safety belt lower anchor.   Tighten the new Torx bolt to 40 Nm (30 lb.ft).

.

Install the door aperture weatherstrip.

.

Return the seat backrest to the upright position.